The Basement Transformer Before & After Photos

When it was time to finish this basement the homeowner researched what were the best products to use in a basment environment, they chose the Total Basement Finishing System above all else. Here we installed an Egress window, a full bathroom and some storage with a new laundry room.

We used the Everlast Finished walls, a new linen ceiling and the ThermalDry Elite flooring, we also used the ThermalDry floor tiles in the bathroom. To finish it off we replaced the basement stair treads with a new stained oak tread.

Water had most likely been trickling through the concrete block walls and slab inside this basement. The stains on the walls and floor were also giving the basement an unsightly appearance. Our team stepped in to fix it by installing a plastic vapor barrier that prevents humidity from passing through the walls known as the CleanSpace Wall System. It also gives the basement a brighter and cleaner appearance. The DryTrak System was installed around the perimeter of the basement to collect any water coming through the walls. It’s an interior drainage system that has an opening at the top to do exactly this. To keep the humidity under control, we installed a SaniDry Sedona dehumidifier in the basement as well. 

Before and after we installed our SmartJack system to provide support to their sagging floors and installed our CleanSpace wall system to prevent moisture from coming into the space through the walls. 

We replaced a homeowner’s failing basement entryway with a solid and reliable entryway instead. This entryway is completely constructed using steel and features a weather resistant design. It can handle snow loads and does not have weak bolts that will rust or leak. The old entryway was rusting away, but this new steel entryway and stairs will last for years to come!

A homeowner in Beacon, NY had water leaking into their basement whenever it rained really hard and fast. The most amount of water they ever saw in their basement was less than three inches, but of course that is one too many. The homeowner contacted us to see how we could help this water find its way out of their home. When our specialist met with the homeowner in person for an inspection of the basement, he proposed that we install our TripleSafe Sump Pump System to give this basement the ultimate protection against flooding. This state-of-the art sump pump system is equipped with three lines of defense that help prevent floods from occurring. First, there is the 1/3 horsepower cast-iron pump that can discharge up to 2,220 gallons of water per hour from your home at an 8-foot head. Second, there is the 1/2 horsepower pump that will take over in the event that the first one stops working or if there is a heavier volume of water. This secondary pump can discharge up to 3,900 additional gallons of water per hour also at an 8-foot head. Finally, there is the UltraSump Battery Backup System which will keep the sump pump system running in the event you have a power outage or a tripped circuit. This device can pump out up to 11,500 gallons of water or more on a fully charged battery! No matter what the conditions are, this homeowner can rest assured that the TripleSafe Sump Pump System will transport the water out and away from their basement.